Engineering Plastic

Nylon Sheet & Rod

Name: Nylon Sheet, Rod, Strip & Block
Brand: Holland Plastics
Availability: InStock

Wear · Load · Precision machining

Get A Quote Call 07 5564 6744

±0.1mm

Precision Tolerance

35+ Years

On The Gold Coast

Full Range

Perspex, HDPE & More

Australia-Wide

Fast Delivery

Trade Names: Ertalon, Nylatron, Polystone. Cast Nylon PA6G is the workhorse engineering plastic for machined components — strong, tough, self-lubricating and easy to machine. Holland Plastics is a leading Australian supplier of nylon sheet, rod, strip, block and board on the Gold Coast, cut to size while you wait and freighted Australia-wide. Ask about our no-minimum-order cut-to-size nylon sheet service for prototypes, one-off machined parts and full production runs.

Nylon sheet is the most widely used engineering plastic in Australia for machined components. Its self-lubricating properties, high wear resistance, and excellent machinability make nylon sheet the material of choice for gears, bushings, rollers, and wear strips across virtually every industry. We carry natural (white) and black cast nylon sheet plus oil-filled and MoS2 (Nylatron) grades for high-load and slow-speed bearing applications.

Quick Facts

✓ Over 35 years experience
✓ No minimum order
✓ Fast turnaround
✓ Australia-wide delivery

Get A Free Quote (07) 5564 6744

Nylon Grades We Stock

Cast Nylon 6 (PA6G) — natural & black, sheet, rod, strip & block

Extruded Nylon 6 — smaller diameter rod and thin sheet

Nylon 66 — higher temperature and stiffness than Nylon 6

Oil-Filled Nylon — lower friction for slow-speed bearings

MoS2 Nylon (Nylatron GS) — molybdenum disulphide filled, dark grey

Glass-Filled Nylon — increased stiffness and dimensional stability

⚙Technical Specifications

Material Type

Nylon (PA6G — Cast Polyamide 6)

Specific Gravity

1.15

Tensile Strength

~80 MPa

Impact Strength

High

Continuous Service Temp

−40°C to 100°C (short-term 140°C)

Water Absorption (24 hrs)

~0.7%

Coefficient of Friction

Low — self-lubricating

Wear Resistance

High

Electrical Insulation

Good

Machinability

Excellent

Applications

Heavy load machine slides and wear strips

Conveyor components — rollers, guides, sprockets

Gears, bushings, and bearings

Parts subject to high impact stresses

Food processing components (FDA grades)

Electrical insulators and spacers

Available Sizes

Form	Thickness / Diameter	Sheet Size	Colours
Sheet (White)	10, 12, 15, 20, 25, 30, 40, 50mm	3050 x 1220mm	White
Sheet (Black)	10, 12, 16, 20, 25mm	3050 x 1220mm	Black
Sheet (Black)	30, 40, 50mm	2000 x 1000mm	Black
Rod	6–200mm diameter	—	White, Black

Fabrication & Processing

Nylon machines beautifully on lathes, mills, and CNC machines. It produces long, continuous chips and excellent surface finishes. Pre-drying is recommended before machining thick sections to minimise dimensional changes from moisture absorption.

CNC turning — excellent surface finish, tight tolerances achievable

Milling — use sharp carbide tools with positive rake angles

Drilling — standard HSS drill bits work well

Tapping — nylon holds threads well for M4 and larger

Note: account for 2–3% moisture expansion in dimensioning

Nylon vs Acetal

Property	Nylon	Acetal
Tensile Strength	~80 MPa	~70 MPa
Impact Strength	Higher	Good
Water Absorption	0.7%	0.2%
Dimensional Stability	Good (dry)	Excellent
Self-Lubrication	Excellent	Good
Wear Resistance	Excellent	Good

Frequently Asked Questions

Does nylon absorb water?+

Yes — nylon absorbs moisture from the atmosphere (up to 2.5% at equilibrium). This causes dimensional growth of approximately 0.3% per 1% moisture absorbed. For precision parts, consider Acetal (Delrin) which has much lower water absorption, or machine nylon parts slightly undersize to allow for expansion.

Is nylon better than acetal for gears?+

For gears, nylon is generally preferred when impact loading or noise reduction is important. Acetal is preferred when dimensional precision and low moisture environments are critical. For nylon-on-nylon gear pairs, consider using different grades to reduce wear.

What is the difference between cast and extruded nylon?+

Cast nylon (PA6G) is polymerised in a mould, producing larger stock sizes with better crystallinity, higher mechanical properties, and lower internal stresses. Extruded nylon (PA6) is melted and pushed through a die — it is available in smaller sizes and is slightly less expensive.

Instant Pricing

Cut To Size Calculator

Get a price in seconds — enter your material, dimensions and quantity for instant online pricing.

Get Pricing

Related Materials & Services

Wear Strips Plastic Fabricated Parts Acetal UHMWPE PEEK CNC Lathe Machining

Free Quote

Get a Quote on Nylon Sheet & Rod

Send us your specs, drawings or rough idea — our Gold Coast workshop will reply within one business day.

Ready to Get Started?

Get a free, no-obligation quote on Nylon Sheet & Rod from single pieces to full production runs.

Buy Online Request A Quote Call 07 5564 6744