07 5564 6744

Plastic Laser Cutting

Operating some of the most sophisticated Laser Cutting machinery Holland Plastics has the capacity to cut steel, plastics and timber (MDF, ply). We can offer very competitive prices with a superb turn around with our Laser Cutting service. 
Our Laser Cutting service allows us to cut a wide spectrum of materials such as:

  • Stainless steel
  • Mild steel
  • Bizalloy titanium

Steel Laser Cutting
Acrylonitrile Butadiene Styrene (A.B.S.)


The following values are typical for 3mm coloured ABS sheets at nominal 24 C temperature. Tests were conducted in the extrusion direction.
TEST METHOD & UNITS ABS
PHYSICAL PROPERTIES
Specific Gravity ASTM D-792 1.08
Rockwell Hardness ASTM D-785 102
MECHANICAL PROPERTIES
Tensile Strength ASTM D-638, kg/cm2 400
Elongation at Break ASTM D-638, % 40
Flexural Strength ASTM D-790 kg/cm2 640
Flexural Modulus ASTM D-790, 104 kg/cm2 2.3
Notched Izod Impact Strength ASTM D-256
1/8" kg-cm-cm 45
1/4" kg-cm-cm 40
THERMAL PROPERTIES
Deflection Temperature Under Load, Annealed ASTM D-648, C 98
Vicat Softening Point ASTM D-1525, C 105
Continuous Service Temperature Range C (Dependent on part "molded-in" stresses) 71-82
Longitudinal Orientation Shrinkage
150 C/20min) K-LRT1, % 6

Tolerances (All dimensions are measured at 22-24 degrees Celsius).
Length width thickness

Sheet length up to 1.5m

 +3/-1.5mm +1.5/-1.5mm 5%

Sheet length 1.5m to 4m

 +10/-0mm +5/-0mm 5%

Special sizes over 4m

 +20/-0mm +5/-0mm 5%