POLYPROPYLENE plastic has a very good chemical resistance combined with
excellent mechanical properties.
TYPICAL PROPERTIES
- Minimal
moisture absorption of 0.03%
- High
impact strength and toughness
- Thermoformable
- Very
high fatigue properties
- Working
temperature range of -160 to 100 Deg. Cent.
- Natural
grades (low transparency) approved for use in the food
industry.
CHEMICAL
RESISTANCE
POLYPROPYLENE is not resistant to aromatic and
chlorinated hydrocarbons.
Avoid all possible contact with copper & manganese.
U.V
RESISTANCE
Sheet & Rod products of POLYPROPYLENE are not UV Treated.
There are special grades available that are UV treated.
APPLICATIONS
Bearings and bushings, pump components, tank liners,
bench tops, cooling or scrubbing towers & corrosive
storage vessels.
COLOUR
RANGE
Rod - White
Sheet - Beige
POLYPROPYLENE can be supplied in Sheet & Rod
POLYPROPYLENE
PP SHEET THICKNESS & SIZE
Colour
BEIGE
30mm in 3000 X 1500mm sheets
2, 3, 4.5, 6, 10, 12, 15, 20, 25,30mm
2000 X 1000mm Sheets
40, 50, 60, 70mm
POLYPROPYLENE PP ROD
Available rod diameter
Colour WHITE
2 m Lengths
10, 12, 15, 20, 25, 30, 40, 50, 60, 70, 80, 90,
100mm
0.5 m Lengths
120, 150, 180, 200, 250mm
CUT
TO SIZE SHEET
We offer a
cut to size service for POLYPROPYLENE PP sheet.
CUT TO SIZE ROD
We offer a
cut to size service
for POLYPROPYLENE PP Rod.
- 10 to 40mm Diameter must be purchased in full length
only
- 50mm Diameter & over MINUMUM cut to size is 500mm
