07 5564 6744

Plastic Laser Cutting

Operating some of the most sophisticated Laser Cutting machinery Holland Plastics has the capacity to cut steel, plastics and timber (MDF, ply). We can offer very competitive prices with a superb turn around with our Laser Cutting service. 
Our Laser Cutting service allows us to cut a wide spectrum of materials such as:

  • Stainless steel
  • Mild steel
  • Bizalloy titanium

Steel Laser Cutting
P.T.F.E.

Trade Name: (Virgin) Teflon

P.T.F.E
.is well known for its antistick and low friction qualities. It has excellent electrical properties, is virtually unaffected by weather and is chemically inert. Under light loads its working temperature range is -110 to 145 Deg. Cent. Although this upper limit can increase to 260 Deg. Cent. By utilizing certain additional fillers.

Various grades have been developed to suit a specific applications. Please advise your application so a suitable grade can be recommended.


TYPICAL PROPERTIES of P.T.F.E. (Virgin) TEFLON
  • Outstanding dielectric properties.
  • Excellent low temperature toughness
  • Slippery non stick surface
  • Excellent UV resistance
  • Working temperature range of -110 to 145 Deg. Cent. (PTFE Virgin)
  • Other grades available to suit various applications.

CHEMICAL RESISTANCE
PTFE (Virgin) is not affected by almost all chemicals and solvents.

U.V RESISTANCE
Sheet & Rod products of POLYPROPYLENE are not UV Treated. 
There are special grades available that are UV treated.
 
APPLICATIONS
Seals, seats, packings, chevron packings, piston rings, glide rings, lantern rings, and back up rings. Slide bearings, electrical and thermal insulators.

COLOUR RANGE

Sheet - White
Rod    - White
Tube   - White
P.T.F.E. (Virgin) can be supplied in Sheet,  Rod & Tube

P.T.F.E. (Virgin) SHEET THICKNESS & SIZE:

Colour - WHITE
1200 X 600mm sheets    3, 4.5, 6, 8, 10, 12, 15, 20, 25mm
610 X 610mm Sheets     30, 35, 40, 45, 50mm
                                                                                                           
P.T.F.E. (Virgin) ROD
Available rod diameter
Colour:  WHITE
2 m Lengths      10, 12, 15, 20, 25mm
1.0 m Lengths    30, 35, 40mm
0.5 m Lengths    45, 50mm
0.3 m Lengths    55, 60, 65, 70, 75, 80, 85, 90, 95, 100, 105, 110mm

P.T.F.E. (Virgin) TUBE

Available TUBE diameter
Colour - WHITE

There is a full range of PTFE Tubes available to suit any application,
Please detail the Outside & Inside Diameters in your enquiry.

CUT TO SIZE SHEET
We offer a cut to size service for P.T.F.E. (virgin) sheet.
                        
CUT TO SIZE ROD
All RODS must be purchased in full length only.   
                        
CUT TO SIZE TUBE
All TUBE must be purchased in full length only.