Trade
Names: Polystone H.D.P.E.
is High Density Poly Ethylene.
H.D.P.E. is a very rigid material for use in general
plant engineering, tank construction and waste water industries. Where
all round chemical resistance and weather ability is required.
TYPICAL PROPERTIES
- Good
impact resistance
- High
mechanical strength
- Resistant
to many solvents
- Very
good electrical insulator
- Excellent
abrasion resistance
- Very
high damping properties
- Continuous
use temp. of -45 to 100 Deg. Cent.
- Minimum
water absorption (0.01%)
CHEMICAL
RESISTANCE
HDPE is resistant to Acids, Salts & salt solutions,
Alcohols, oils, fats, waxes & many solvents.
All PE material is affected by strong oxidizing agents
such as nitric acid, chromic acid or halogens.
Aromatics and Halogenated hydrocarbons cause swelling.
U.V
RESISTANCE
Sheet & Rod products of HDPE are supplied in two colours
White which is non UV
Black which is UV.
APPLICATIONS
Machine guards, water tanks, chemical tanks, cutting boards,
pipe fittings & component parts.
COLOUR
RANGE
White - Non UV.
Black - Has UV protection.
HDPE can be supplied in Sheet & Rod
HDPE
SHEET THICKNESS
White & Black
1.5, 3, 4.5, 5, 6, 10, 12, 15 20, 25, 30mm
SHEET SIZE
Sheet Sizes available are 2000 X 1000mm
HDPE ROD
Available rod diameter is Black Only
2 m Lengths
25, 30, 35, 40, 45, 50, 65, 70, 75mm
1 m Lengths
80, 90, 100mm
0.5 m Lengths
110, 125, 150mm
CUT
TO SIZE SHEET
We offer a cut to size service for HDPE Sheet.
CUT TO SIZE ROD
We offer a
cut to size service for HDPE Rod.-
25 to 45mm O.Dia. must be purchased in full length only
- 50mm diameter & over MINUMUM cut to size is 500mm
